Blog

November 2015

Subscribe to RSS Feed

  • Road Scholars
    Road Scholars

    Posted: 11/18/2015
    IP-S2 scanning technology, helps APAC Tennessee tackle survey demands on eight-mile road job.

    On a tight-schedule highway reconstruction job for the Arkansas Highway and Transportation Department (AHTD), APAC Tennessee needed to choose between bringing survey crews in from other projects or finding an alternative method to tackle its initial survey needs. It opted to use mobile LiDAR scanning on the highly-incentivized 8.5 mile project, giving them the data needed to meet their survey demands. Doing so not only got that job done quicker and far more efficiently, it improved their competitive position for future bids and opened the door to new uses for the technology.

    Incentive to change

    According to Jim Smith, APAC engineering manager, the project was challenging in so many ways. "In addition to the incentives, there were also some interesting twists to the profile segment of the survey which almost dictated how we tackled the job," he said. "We knew that the logistics of getting things surveyed were going to be tough; there simply wasn't room for a delay anywhere."

    Smith said he knew that dedicating the amount of manpower needed to keep the survey function on track would adversely affect other jobs within the division - not an option they liked.

    "When we considered the scope of what was needed, we just felt like we had to look past conventional surveying," he said. "So we contacted Earl Dudley & Associates, the Topcon scanner specialist for this area, and had them show us just how Topcon's IP-S2 Mobile Mapping System could work for us."

    Proof is in the piles

    To test the feasibility of scanning in their operation, Smith and his colleague, Jerrad Burns, had Dudley's crew visit them at APAC's Memphis location to use the IP-S2 to scan some aggregate piles.

    "Stockpile inventory is a labor-intensive process, which means we generally have to pull surveyors off other projects to do it," he said. "With the road job looming larger, we knew we wouldn't be able to do that. The technology immediately impressed us. One 40-minute driving session around the piles yielded more data - with higher accuracies - than what a crew of three or four working a day and a half could compile. We knew we were on the right track."

    Calculating the savings

    Both Smith and Burns agree that adding the IP-S2 will result in direct, bottom-line savings - though quantifying it will not be easy.

    "On this job alone it would have taken two crews two weeks to do what one surveyor and I did in a week with LiDAR," said Smith. "So that's a time savings of one week, which, for us, can be seen as $500,000. That's significant, but it runs so much deeper than that. Because we had the IP-S2, we did not have to pull people off of other jobs to keep the pace up on this one, so none of those other projects suffered."

    He added that being one of the first in the region to have such technology underscores the commitment APAC has to newer technology.

    "We are fortunate to have management that understands what it takes to be competitive and lets us move forward with things like this," he says. "We are bidding several jobs in the next few lettings and have already established which ones are going to be IP-S2-based jobs. Knowing we have this tool available allows us to aggressively bid on jobs like this one. It's a powerful advantage to have."
  • Topcon Offers Control Box for Excavator Systems
    Topcon Offers Control Box for Excavator Systems

    GX-55 control box for machine-controlled excavation


    Posted: 11/6/2015
    Topcon Positioning's GX-55 control box for machine-controlled excavation is now available in the Americas. With the release of the GX-55, Topcon adds three new 2D and 3D systems to its line of excavation solutions - the X-52 as well as the X-53 and X-53i. In any solution, the GX-55 is designed to provide users with new visual and audible features to achieve grade safely and efficiently for 2D or 3D excavating tasks.

    "The bright and robust GX-55 delivers the highest quality graphical experience for modern machine control," said Kris Maas, director of construction product management. "Today operators use Sitelink3D to instantly communicate entire job activities to managers on-the-go. The GX-55 delivers this real-time project information faster than ever."

    "Whether you want to take advantage of Topcon 2D, 3D or 3D indicate machine controlled excavation systems, the new GX-55 is delivered in a lightweight package for easy machine transfer, storage, and quick cable attachment," Maas said.

    The large 6.5-inch sunlight-viewable and color LCD touchscreen is surrounded by integrated LED light bars for a continuous grade reference of the bucket's teeth. Additional features include customizable audible tones for grade reference, integrated virus protection, and easy-access USB ports for saving and downloading job files, Topcon said.

Archive